The best SomoGaer PEQ 15 Laser

 With this file you will be able to print PEQ Mount Cap (Requires Base) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on PEQ Mount Cap (Requires Base).

 

About the Bravo peq-15 military and Flashlight Aiming Device:

Night time operations can be a challenging time to play.  It's hard to see your targets, and identify friend or foe.  Even worse, once you do identify your target, it's even harder to aim and hit them with conventional iron sights.  The PEQ 15 Laser and Flashlight by Bravo solves all of these problems.  https://bit.ly/2GlQO7U accurately replicates a real PEQ 15 that is used by many of the world's special operation units.  The unit has a built in visible flashlight and a visible green laser.  There are multiple modes of operation available as well.  There is a toggle switch on top of the unit that allows you to select these different modes.  You can select the momentary flashlight on, the steady flashlight on, the steady laser on, or the flashlight and laser steady on.  This gives you all of the tools you need to identify your targets, and accurately target them at night.  The light is very bright, at close to 250 lumens, you can spot your targets at long ranges.  The green laser allows you to mark your targets at long ranges in the night, and the green color allows you to easily pick up on the laser easier than standard red lasers.  The box also includes stickers to accurately replicate the warning stickers on the real unit.  The box mounts to any mil standard 1913 picatinny rail.  It also includes a pressure switch that can be mounted any where on your rifle that is most comfortable to you.  It is available in both black and dark earth brown to match the color scheme you are building on your rifle.

 

This part works with the peq-15 military (sold separately on my shop https://bit.ly/2GlQO7U). The cap locks onto the base covering the Mobius cameras and giving the mount the appearance of a PEQ box typically found on modern firearms and very popular with airsofters. The cap is easy to snap on and remove and has been drop tested (accidentally) and can withstand a rough hit to the ground (not recommended). The cap works in conjunction with the peq 15 laser and covers the two Mobius cameras while still allowing access to all the important functions of the camera. The two power buttons are exposed to allow for quick record start and stop, https://bit.ly/2GlQO7U is recommended that the Mobius cameras be configured for one button record. Additional openings allow for the heat sinks to be exposed as well as the record light indicator on top and back of the mount while covering the forward facing light to further reduce the signature of the mount and cameras.