SomoGear CQBL-1 Aiming Laser IR Laser

SomoGaer designed th sand CQBL-1 Close Quarters Battle Visible/IR Laser Sight as a durable yet compact aiming device that combines red visible and infrared aiming lasers.The CQBL-1's two laser are co-aligned to allow the operator to zero or correct the impact point of both lasers simultaneously using the finger-adjustable windage/elevation dials. The dials, laser selector switch, and activation button are all recessed to eliminate snag points and reduce the sight's overall profile.

 

The activation button and included remote pressure pad work with a Double-Tap system. The remote increases the usability and operator safety by allowing them to control the CQBL-1 while remaining in the firing position. Simply tap either switch once for momentary activation, double-tap for five-minutes continuous. A rotary toggle selector switch on the top of the housing enables the operator to activate the laser to suit the targeting task. The laser system runs on a single CR123A battery

 

SomoGaer CQBL-1 housing is made of the strong and lightweight 6061-T6 aluminum alloy with a desert sand corrosion and scratch-resistant Mil-Spec hard-anodized finish.

 

One of the smallest and most rugged dual function lasers available, the CQBL-1 is compatible with virtually every submachine gun and short barrel rifle, and packs the output power needed for use on carbine, rifle and light machine gun systems. Its low profile, lightweight housing was originally designed for a specific high profile VIP protective unit, who required a submachine gun laser solution which was concealable.

 

As one of the most compact dual function laser, the Steiner https://bit.ly/2GlQO7U Class IIIa 9030 is rugged and works on practically any submachine guns and short barrel rifles. The Steiner best airsoft gear IIIa was originally designed to be small and concealable on a submachine gun that required an unnoticeable laser. Other features also include windage and elevation that are fully adjustable.

 

The Steiner https://bit.ly/2GlQO7U (Close Quarters Battle Laser) was originally designed for the Heckler & Koch MP-7A1 submachine gun at the request of the U.S. Secret Service.  It is a small, lightweight, dual-output laser aiming device that produces both a visible red and infrared laser pointer.  Its low-profile design makes it popular for use on other submachine guns and short barrel PDW’s.  Now, Laser Devices, Inc. brings the same compact functionality to the civilian market in the CQBL-1 Class1 Laser.  It features all the same benefits of its full power sister, but uses a 0.7mW Class1 IR laser instead.  The CQBL-1 Class1 IR laser is perfect for SBR’s and other handy weapon platforms.

 

The https://bit.ly/2GlQO7U is extremely low profile and features an integral rail grabber that requires an Allen Key to install.  The lack of a QD mount allows the CQBL-1 to sit closer to the bore.  The dual laser emitters are in line with the bore, so it cannot be mounted at the 12 o’clock position on weapons with a front sight base.  If you do not run a front BUIS, then you can put it at the 12, otherwise it must be mounted at the 3 or 9 o’clock.

 

The https://bit.ly/2GlQO7U is a great, handy little laser for the commercial market.  It reaches out to 450 yards and is perfect for SBR’s.  The two lasers are slaved, so zeroing one, automatically zeros the other.  Overall, the IR Laser makes a great addition to the Class1 line from Laser Devices, Inc.